This allows the new hardware to be detected and the configuration of the Windows system modified to enable it to boot. You will need to run ReDeploy from the Windows PE Reflect rescue CD. ReDeploy is designed to detect changes to these critical system features,locate relevant drivers and inject them into your windows operating system to enable it to boot. Again, for a stable system,this driver needs to match the hardware – in this case, the CPU model. A driver is optionally loaded to handle specific CPU features. The kernel and its associated HAL need to match the motherboard for best enabling. Once the kernel and the critical drivers are loaded, the kernel is started. If the new hardware configuration requires a new driver to read the disk containing the operating system then Windows will fail to boot. It must be undertaken when windows is being installed but then is skipped during a normal windows boot to make the boot delay acceptable.Įarly in the boot process, the boot loader loads the windows kernel (the core of the operating system) and selected “critical” drivers required to get Windows up and running.
The discovery of hardware and association with a matching device drivers is a time consuming process. The purpose of ReDeploy is to attempt to overcome these issues enabling a Windows installation to run on new hardware. There are various aspects of the windows boot processes that will typically cause a boot failure after significant changes to the hardware. Moving between a physical and a virtual machine (P2V / V2P ).Ĭhanging a non-raid to a raid installation or legacy SATA to AHCI SATA
Migrating to a new machine due to hardware failure or planned upgrade such as a new motherboard etc.
There are a variety of scenarios where you might need to move a windows installation to a new machine.
0 kommentar(er)
